Quadro Machine Specifications
Capacity Steel 22 ga CRS, 58,000 PSI
Capacity Aluminum .032"
Capacity Copper 20 oz
Capacity Zinc .040"
Minimum Capacity 26 ga CRS, 58,000 PSI
Line Speed 65 ft per minute
Electrical Requirements 230 v, 1 phase, 60 hertz
Length with Decoiler 160"
Height 50"
Width 60"
Machine weights
Quadro w/ cassettes3,500 lbs
Cinco Notcher 500 lbs
Cinco Cutter 500 lbs
28' Cinco Trailer 3,500 lbs
Minimum Panel Length—Nail Strip 36"
Minimum Panel Length—Snap Seam 24"
Minimum Panel Length—Mechanical 24"
Minimum Panel Length—CINCO12" (exit shearing)
Minimum Panel Width 10"
Maximum Panel Width 28"
Quadro Panel Slopes
Panel Minimum Slope Material Drop
1" Snap Seam 3:123.00"
1.5" Snap Seam 1.5:12 4.50"
1" Nail Strip 3:124.25"
1.5" Nail Strip 1.5:12 5.25"
1" Mechanical 3:122.75"
1.5" Mechanical 1.5:12 3.75"
1" U-Panel 3:122"
1.5" U-Panel 1.5:12 3"
2" Mechanical 3/4:12 5.25"
1" soffit (no reveal) N/A 3.75"
1" soffit (max reveal) N/A 4.75"
1.75" Snap Lock 3/4:12 6.00"
Quadro Plus Technical Specifications 
Operating Speed45.9 ft/min (optional 65.6 ft/min)
Shortest Panel Length27.5 inches
Infeed Width11.8 - 31.5 inches
Processable Materials (Profile Dependent)Non-ferrous metals: Either .024 - .032 inch OR .032 - .039 inch (has to be set before ordering)
Non-ferrous metals: .039 - .047 inch (only with façade profiles)
Steel (320N/mm²): 26ga - 24ga
Stainless Steel: Max 26ga
Dimensions (L x W x H)128 in x 68.5 in x 50.2 in
WeightApprox. 2755 lbs. (with exchangeable cassettes)